[Jan-2024] JNCIP-DC JN0-682 Exam Practice Test Questions Dumps Bundle!
2024 Updated JN0-682 PDF for the JN0-682 Tests Free Updated Today!
The JN0-682 exam is ideal for network professionals who are looking to gain expertise in data center technologies. Data Center, Professional (JNCIP-DC) certification is especially beneficial for those who are responsible for designing, implementing, and managing data center networks. Data Center, Professional (JNCIP-DC) certification validates the candidate's knowledge and skills in data center technologies and helps them stand out in the job market.
Juniper JN0-682 is a professional-level certification exam designed for network engineers and architects who want to demonstrate their expertise in data center technologies. JN0-682 exam covers various topics related to data center design, implementation, and troubleshooting, including virtualization, storage, networking, and security. Passing JN0-682 exam validates the candidate's skills and knowledge required to work with Juniper Networks' data center products and solutions.
NEW QUESTION # 51
In the exhibit, VM1 is part of the same VXLAN segment as VM3.
Which type of message will R1 initially send to R2 so that VM1 receives BUM traffic from VM3?
- A. PIM Join
- B. PIM Register message
- C. IGMP Join (*.G)
- D. IGMP Join (S, G)
Answer: A
NEW QUESTION # 52
You are considering deploying a MAC-VRF type routing instance with a VLAN-bundle service type. In this scenario, which two statements are correct? (Choose two.)
- A. It can be implemented in an ERB architecture.
- B. VLAN normalization is supported.
- C. It can be implemented in a bridge overlay architecture.
- D. Multiple VLAN IDs per EVI are supported.
Answer: D
NEW QUESTION # 53
You are asked to enable plug-and-play line card switches in an active VCF without making any future Junos configuration charges. You are also required to ensure that all new line card are automatically upgrade to the correct Junos version without any manual intervention. In this scenario, which two actions will accomplish this task? (Choose two.)
- A. Ensure that the newly instead card's MAC addresses are present in the DHCP configuration for ZTP.
- B. Configure the auto-sw-update parameter on the VCF before inserting new line cards.
- C. Set the Virtual Chassis as per-provision before the line are inserted.
- D. Set the virtual Chassis as auto-provisioned before the line cars are inserted.
Answer: B,D
NEW QUESTION # 54
You are an architect for an enterprise organization that currently operates three data centers with plans to expand to five data centers in the next year. You already notice large amounts of BUM flooding and must control this issue before implementing the next two data centers.
Which feature would address this issue?
- A. type-6 routes
- B. type-5 routes
- C. VXLAN BUM traffic filter
- D. mesh groups
Answer: B
NEW QUESTION # 55
What is the purpose of the command shown in the exhibit?
- A. To stop the reception of transit multicast traffic when there are no interested receives attached to the local VTEP
- B. To disable the group2390.0.1 across the entire VXLAN.
- C. To stop the transmission of transit multicast traffic when there are no interested receives attached to a remote VTEP
- D. To disallow IGMP request for the group 239.0.01 from host attached to the local VTEP
Answer: C
NEW QUESTION # 56
In the exhibit, VM1 is part of the same VXLAN segment as VM3.
Which type of message will VTEP B initially send to the RP so that VM3 can communicate with VM1?
- A. PIM register message
- B. IGMP Join (*, G)
- C. PIM join
- D. IGMP Join (S,G)
Answer: A
NEW QUESTION # 57
You host a multitenant data center that runs VMware. You must perform deep packet inspection on all
inter-tenant traffic that is flowing between the VMs within the same hypervisor. Your solution must provide
the security services without needing to leave the physical device.
In this scenario, what should you do to solve this problem?
- A. Use separate vswitches to isolate each-tenant's network and use and use a vSRX device to evaluate
inter-tenant traffic. - B. Use VLANs to isolate each tenant's networks and use an SRX Series device to evaluate inter-tenant
traffic. - C. Use a vMX device to isolate each tenant's network and use firewall filters to evaluate inter-tenant
traffic. - D. Use a VLANs to isolate each tenant's network and use IP tables to evaluates inter-tenant traffic.
Answer: A
NEW QUESTION # 58
A VXLAN adds 50 to 54 bytes of extra header information to an Ethernet frame.
In this scenario, how would you accommodate this increased?
- A. Increase the MTU on the VTEP interface connected to the VXLAN network
- B. Increase the MTU on the Physical interface connected to the VXLAN network.
- C. Only use switches as VTEPs.
- D. Decrease the number VXLANs used
Answer: B
NEW QUESTION # 59
You are asked to manage the oversubscription ratio of your spine and leaf IP fabric. You determine that you are at a 3:1 ratio of downstream to upstream traffic and must achieve a
1.1ratio. In this scenario, which two actions would you take to achieve this goal? (Choose two.)
- A. Reduce the number of leaf nodes on your design.
- B. Increase the number of server facing ports that each leaf node uses to carry traffic.
- C. Reduce the number of server facing that each leaf node uses to carry traffic.
- D. Increase the number of spine nodes in your design.
Answer: C,D
NEW QUESTION # 60
You are logged in to Leaf 1. When examining the routing table, you notice that you have no routes from Leaf 2.
Referring to the exhibit, which two commands would you use to troubleshoot the problem?
(Choose two.)
- A. From Spine 1, issue the show route advertising-protocol bgp 172.16.1.2 command.
- B. From Leaf 2, issue the show route advertising-protocol bgp 172.16.1.2 command.
- C. From Leaf 1, issue the show route receive-protocol bgp 172.16.1.1 command.
- D. From Spine 1, issue the show route advertising-protocol bgp 172.16.1.1 command.
Answer: A,C
NEW QUESTION # 61
Referring to the exhibit, each node in the IP fabric is peering to its directly attached neighbor using EBGP. Each node is peering using physical interface IP addresses. Leaf 2 and Leaf 3 are advertising the 10.1.1/24 network into EBGP. Spine 2 must be configured so that it can load- share traffic destined to the 10 1.1/24 network over both next-hop A and next-hop B.
Which two actions must be performed to accomplish this task? (Choose two.)
- A. Use advertise inactive
- B. Use multipath multipath-As
- C. Use a load-balancing policy applied to the forward table
- D. Use multihop
Answer: B,C
NEW QUESTION # 62
You are asked to configure JTI on the QFX Series devices in your data center fabric. You must use sensors with the least amount of latency. Which type of sensor should you use in this scenario?
- A. JTI OpenConfig sensors
- B. JTI native sensors
- C. Python sensors
- D. analog sensors
Answer: B
NEW QUESTION # 63
What are two streaming data formats supported for network analytics? (Choose two.)
- A. JSON
- B. SLAX
- C. GPB
- D. XML
Answer: A,C
Explanation:
Starting in Junos OS Release 13.2X51-D15, network analytics supports the following streaming data formats and output:
Google Protocol Buffer (GPB)
JavaScript Object Notation (JSON)
Comma-separated Values (CSV)
Tab-separated Values (TSV)
Queue Statistics Output for JSON, CSV, and TSV
Traffic Statistics Output for JSON, CSV, and TSV
https://www.juniper.net/documentation/us/en/software/junos/network-mgmt/topics/topic-map/network-analytics.html
NEW QUESTION # 64
Which two statements are true about VRF routing instances? (Choose two.)
- A. VRF can be used in conjunction with Layer 3 logical interfaces.
- B. Each logical Layer 3 interface can belong to only one routing instance.
- C. VRF does not enable multitenancy.
- D. Each logical Layer 3 interface can belong to multiple routing instances.
Answer: A,B
NEW QUESTION # 65
You are implementing perimeter security for your data center. You need to inspect all traffic Layer 7 and ensure the failure of a port or device will not result in an interruption to traffic flows. In this scenario, which design would satisfy these requirements?
- A. SRX using LAG
- B. QFX Virtual Chassis
- C. MX with MC LAG
- D. SRX Chassis cluster
Answer: D
NEW QUESTION # 66
You are troubleshooting a connectivity issue across a VXLAN overlay network. In the exhibit, you are using the ping overlay command from a local VTEP residing on a OFX 5120 to a remote VTEP residing on a separate QFX5120.
What is the problem in this situation?
- A. VXLAN VN1100 is not configured on both end points.
- B. VXLAN VN1100 is not configured on the local VTEP
- C. VXLAN VN1100 is not configured on the remote VTEP.
- D. The VXLAN controller is down.
Answer: C
NEW QUESTION # 67
You have deployed a VXLAN as shown in the exhibit Leaf1, leaf3, spine1, and spine2 have been configured
as VTEPs. Host1 cannot communicate with host2.
Referring to the exhibit, how would you solve this problem?
- A. A DCI connected must be created between the VLANs
- B. The VLAN ID on the connected to host2 must be changed to VLAN 100
- C. Host1 and host2 must be placed in the same VRF
- D. A layer 3 VXLAN gateway must be configured on at least on at least one of the devices
Answer: D
Explanation:
Explanation
You need an L3 gateway to route between those two different subnets/VLAN's
NEW QUESTION # 68
Exhibit.
Site 1 contains 20+ VMs. The link between Site 1 and Leaf1 goes down.
Referring to the exhibit, which statement is correct?
- A. Type-1 routes for all VMs in the site will be withdrawn all at once.
- B. Type-1 routes for each VM will be withdrawn one at a time.
- C. Type-1 routes for all VMs in the site will expire all at once.
- D. Type-1 routes for each VM will expire one at a time.
Answer: B
NEW QUESTION # 69
You are asked to design a deployment plan for a large number of QFX Series switches using ZTP. The ZTP
deployment plan must ensure all switches are configured with their designated configuration file.
Which DHCP option and subscription combination would be used to accomplish this task?
- A. DHCP option 43 a suboption of 00.
- B. DHCP option 43 a suboption of 01.
- C. DHCP option 66 a suboption of 01.
- D. DHCP option 66 a suboption of 00.
Answer: B
NEW QUESTION # 70
You are deploying an EBGP IP fabric. In this scenario, which statement is true?
- A. Each spine should peer with each leaf using loopback addresses.
- B. Each spine should peer with every other spine using physical addresses.
- C. Each spine should peer with every other spine using loopback addresses.
- D. Each spine should peer with each leaf using physical addresses.
Answer: D
NEW QUESTION # 71
......
To prepare for the JN0-682 certification exam, candidates should have at least three years of experience working with Juniper data center solutions. They should also have a solid understanding of networking fundamentals and be familiar with Junos OS. Candidates can choose to attend Juniper's training courses or use self-study materials to prepare for the exam. Once certified, professionals can demonstrate their expertise in Juniper data center solutions and be recognized as trusted advisors to their organizations.
Fully Updated Dumps PDF - Latest JN0-682 Exam Questions and Answers: https://dumpsvce.exam4free.com/JN0-682-valid-dumps.html
