Download VMware 2V0-15.25 Exam Dumps to Pass Exam Easily in 2026 [Q27-Q42]

Download VMware 2V0-15.25 Exam Dumps to Pass Exam Easily in 2026

Get 100% Real Free Professional Level Exams 2V0-15.25 Sample Questions

NEW QUESTION # 27
An administrator is automating the deployment of a new VMware Cloud Foundation (VCF) fleet using VCF Installer. The VCF fleet must include VCF Automation being deployed in a simple deployment model.
The administrator creates a JSON file, but during the installation attempt the VCF Installer returns an error indicating that the JSON validation has failed.
What is the cause of the errors?

• A. Second IP address for VCF Automation is not specified.
• B. NSX Manager size was defined as large.
• C. VCF components binaries are not downloaded.
• D. A separate distributed switch was defined for vSAN traffic.

Answer: A

Explanation:
In VCF 9.0, when deployingVCF Automationusing the VCF Installer in aSimple Deployment Model, the appliance requirestwo IP addresses:
* Primary IP- Management interface
* Secondary IP- Required for service separation and internal routing for Automation services VMware's JSON schema for VCF Installer enforces this requirement. If the second IP is missing, incorrectly formatted, or placed under the wrong JSON section, the installer validation will fail immediately with a JSON schema error before deployment begins.
This is one of themost common causesof validation failure for VCF Automation deployment.
Option A (component binaries missing) produces abundle downloaderror, not JSON schema failure.
Option C (NSX Manager size = large) is allowed and does not break JSON validation.
Option D (separate vDS for vSAN) is allowed if defined correctly and also does not cause JSON schema failure.

NEW QUESTION # 28
Through the VMware NSX Manager user interface, the administrator has identified an issue with BGP peering. Which command on the NSX Edge Transport Node provides more information about the issue?

• A. get edge-cluster history state
• B. get log-file routing follow
• C. get logical-routers
• D. get edge-cluster status

Answer: B

Explanation:
When troubleshootingBGP peering issueson an NSX Edge Transport Node, VMware documentation directs administrators to examinerouting logs, because BGP failures are often caused by adjacency negotiation errors, authentication mismatches, keepalive/hold timer issues, or route-policy failures.
The NSX Edge CLI command:
get log-file routing follow
streams real-time routing logs, including BGP daemon logs (bfdd, routed, wdog) and provides detailed insight into:
* BGP session establishment and teardown
* Keepalive and hold timer exchanges
* Neighbor state transitions
* Route advertisement or rejection
* Authentication mismatches
* MTU or connectivity issues on TEP / uplinks
This is theonlycommand in the list that exposesdiagnostic-level BGP informationneeded to troubleshoot peering.
Option A (edge-cluster status) shows cluster membership only.
Option B (get logical-routers) shows logical router configuration, not BGP logs.
Option C (edge-cluster history state) is unrelated to routing.

NEW QUESTION # 29
A user wishes to publish a VMware Cloud Foundation (VCF) Operations Orchestrator workflow to their VCF Automation project catalog, but Is blocked from publishing any workflows.
The following information has been provided:
* In the VCF Automation Organization portal, the user cannot see the Workflows option under Content Hub.
* The organization is not a Provider Consumption Organization.
Which are the two likely causes of this issue? (Choose two.)

• A. The user is logged in with Project User rights.
• B. An embedded VCF Operations Orchestrator is not integrated with their Organization.
• C. An external VCF Operations Orchestrator is not integrated with their Organization.
• D. The user is logged in the Project Advanced User rights
• E. The user is logged in with Project Administrator rights.

Answer: B,C

Explanation:
In VMware Cloud Foundation 9.0, publishing aVCF Operations Orchestratorworkflow to aVCF Automation project catalogrequires that the Organization has a valid integration withVCF Operations Orchestrator. The question states that the usercannot see the Workflows option under Content Hub, and theorganization is not a Provider Consumption Organization (PCO). According to the VCF 9.0 documentation, only organizations withVCF Operations Orchestrator integrationare allowed to publish workflows into the catalog. Both embedded and external orchestrator integrations must be configured depending on the environment. Ifno orchestrator (embedded or external)is integrated with the organization, workflows cannot be listed or published. This aligns with the documented VCF Automation and VCF Operations Orchestrator design requirements, which specify that workflow publishing is only available when the orchestrator instance is properly registered.
Additionally, user role permission issues could prevent workflow visibility, but the key blockers described in the scenario are the missing workflow section and the organization type. Because the organization isnot a PCO, advanced provider features-including workflow publishing-are disabled unless a proper orchestrator integration exists. Therefore, the two most likely causes are:
* A:An external VCF Operations Orchestrator is not integrated with their Organization.
* D:An embedded VCF Operations Orchestrator is not integrated with their Organization.
These two conditions directly match the documented behavior in VMware Cloud Foundation 9.0.

NEW QUESTION # 30
An administrator has been tasked with expanding an existing VMware Cloud Foundation (VCF) workload domain by adding a new cluster. The VCF fleet has the following configuration:
* Three workload domains, including the management domain are configured.
* The management domain (WLD-01) and one of the workload domains (WLD-02) are running VCF 9.0.
* The other workload domain (WLD-03) is running VCF 5.2.1 and is an isolated workload domain.
When attempting to perform the required steps using the vSphere Client UI the cluster cannot be added to the WLD-02 workload domain. What step should the administrator perform to complete the workload domain expansion?

• A. Use the VCF Operations Fleet Manager UI to create the cluster in WLD-02.
• B. Use the vSphere Client UI to create the cluster in WLD-03.
• C. Use the SDDC Manager API to create the cluster in WLD-03.
• D. Use the SDDC Manager UI to create the cluster in WLD-02.

Answer: A

Explanation:
VMware Cloud Foundation 9.0 introduces a major architectural redesign that replaces the traditional SDDC Manager-centric domain management model with aunified Fleet Management architectureimplemented throughVCF Operations Fleet Manager. In this model, each Workload Domain operates withits own vCenter, but Enhanced Linked Mode (ELM) isremovedto improve isolation, reduce blast radius, and support multi-site scalability. As a result, administrators logged into the vSphere Client of the Management Domain can no longer manage or expand clusters in other Workload Domains, which explains why the vSphere UI blocks the attempted expansion of WLD-02.
Fleet Manager becomes the new authoritative control plane for lifecycle, topology, host commissioning, and workload domain expansion. Only Fleet Manager maintains the fullglobal viewnecessary to orchestrate cluster addition operations across distributed vCenters and domains. Because WLD-02 is running VCF 9.0 and is fully fleet-aware, its expansion must occur throughVCF Operations Fleet Manager, not through the vSphere Client or legacy SDDC Manager workflows.
Options involving WLD-03 are invalid since that domain is running VCF 5.2.1, is isolated, and cannot participate in fleet-aware operations. SDDC Manager (A) is no longer the correct interface for VCF 9.0 domain expansion operations.

NEW QUESTION # 31
An administrator logs into the VMware NSX Manage UI and observes a "Remote Logging Not Configured" alarm for each NSX Management node. What is a possible reason for this issue?

• A. Update the NSX Node Profile to configure a remote logging server.
• B. Update the NSX Uplink Profile to configure a remote logging server.
• C. Update the NSX Configuration Profile to configure a remote logging server.
• D. Update the NSX Edge Cluster Profile to configure a remote logging server.

Answer: A

Explanation:
The"Remote Logging Not Configured"alarm in NSX Manager is a system-health alert indicating that one or more Transport Nodes (Edges or Hypervisors) or Management Nodes do not have a Syslog server defined.
* NSX Node Profiles:In VMware NSX (and by extension VCF), the standard method to apply consistent administrative settings-such asSyslog Servers, NTP settings, and Core Dump configurations-across a fleet of nodes is to use anNSX Node Profile.
* Configuration Path:The administrator should navigate toSystem > Fabric > Profiles > Node Profiles
. Here, they can create or edit a profile that specifies the remote syslog server's IP/FQDN, port, and protocol.
* Application:Once the Node Profile is applied to the NSX Management Cluster or Edge Clusters, the configuration is pushed to all respective appliances, clearing the alarm.
* Why not A/B:Edge Cluster Profiles manage networking/BFD settings; Uplink Profiles manage NIC teaming and MTU.

NEW QUESTION # 32
An administrator attempts to add a new user (provideradmin05) within the VMware Cloud Foundation (VCF) Automation Provider Management Portal, however provideradmin05 cannot be found for import.
The following information is provided:
* The existing VCF Fleet uses VMware Identity Broker (VIDB) for single sign-on.
* VIDB uses Active Directory as the identity provider.
* A group named VCFA_ProviderAdmins was created in Active Directory, populated with the appropriate user accounts and synchronized with VIDB.
* Five days later provideradmin05 was added to VCFA_ProviderAdmins.
What will resolve this issue?

• A. In VCF Operations, disable VCF SSO for VCF Automation.
• B. In the VCF Automation Provider Management Portal, enable the Advanced Rights Bundle Mode.
• C. In the VCF Automation Provider Management Portal, import provideradmin05 as an LDAP user.
• D. In VCF Operations, manually resync the directory.

Answer: D

Explanation:
VMware Cloud Foundation (VCF) 9.x usesVMware Identity Broker (VIDB)as the central identity provider for the entire VCF fleet. VIDB synchronizes user and group metadata from the connected enterprise identity source, in this caseActive Directory. When a user is added to an AD groupafterthe group was already synced into VIDB,VIDB does not automatically resync group membership on demandunless a directory synchronization is performed.
In this scenario, the groupVCFA_ProviderAdminswas synchronized five days earlier. When the new user provideradmin05was later added to the AD group, VIDB-and therefore the VCF Automation Provider Management Portal-does not recognize that new user until amanual directory resynchronizationoccurs fromVCF Operations.
This operation forces VIDB to:
* Requery Active Directory
* Update group membership information
* Repopulate available users for import into VCF Automation
Options B and D are incorrect because they donotinfluence Identity Broker directory synchronization. Option C (disable VCF SSO) would break authentication and is not a valid solution.

NEW QUESTION # 33
An administrator has successfully created a new Organization for All Apps In VMware Cloud Foundation (VCF) Automation. When logging into the new organization using the first user account, only the Overview tab is visible.
What is a possible cause of this issue?

• A. The first user account was assigned the Organization User Role.
• B. The first user account was assigned a Custom Role.
• C. The first user account was assigned the Organization Auditor Role.
• D. The first user account was assigned the Organization Administrator Role.

Answer: A

Explanation:
This issue stems from an incorrect role assignment during the user creation process in VMware Cloud Director (VCF Automation).
Organization Administrator Role (Option D): This role grants full control, including visibility of the Administration tab (to manage users, groups, and settings), Data Centers, and Monitor tabs. If the user were an Admin, they would see all tabs.
Organization Auditor Role (Option A): This is a read-only role, but by definition, an Auditor can view anything an Organization Administrator can see (including the Administration settings), just without edit rights. Therefore, an Auditor would still see the Administration tab.
Organization User Role (Option B): This is a consumer-level role designed for deploying and managing vApps. By default, this role does not have access to the Administration tab or high-level organization settings.
If the organization is new and has no vApps or VDCs populated yet, a user with this role might see a very restricted view (effectively just a dashboard or "Overview") because they lack the rights to see the administrative configuration menus.
Conclusion: The fact that the "Administration" tab is missing (implied by "only Overview is visible") identifies the user as an Organization User (or a restricted Custom Role) rather than an Administrator or Auditor.

NEW QUESTION # 34
An administrator has received reports of high CPU ready times on several Virtual Machines (VMs) running within a VMware Cloud Foundation (VCF) workload domain and has been tasked with collecting detailed metrics for all running Virtual Machines from each ESX host.
Which command line utility will enable the administrator to collect the required metrics?

• A. esxcli
• B. vim-cmd
• C. esxtop
• D. vimtop

Answer: C

Explanation:
To collect detailed per-VM CPU metrics-especiallyCPU Ready (%RDY)-the correct command-line utility on an ESXi host isesxtop. This tool provides real-time, low-level performance data for CPU, memory, disk, and network usage, and is the authoritative method for diagnosing CPU contention issues in VMware environments.
When troubleshootinghigh CPU Ready times, esxtop allows administrators to:
* View CPU contention at the VM level
* Inspect co-stop, wait, and scheduling delays
* Monitor NUMA distribution and pCPU saturation
* Capture historical performance snapshots using batch mode
The other options do not provide the necessary VM-level CPU scheduling metrics:
* A. vimtop: Only available on vCenter Server Appliance (VCSA), not ESXi; doesnotshow VM CPU ready.
* B. esxcli: Used for configuration and health checks; not for real-time CPU metrics.
* C. vim-cmd: Used to manage VMs via vSphere API bindings; not a performance monitoring tool.

NEW QUESTION # 35
An Administrator has been tasked with creating a new VMware Cloud Foundation (VCF) Automation Region named Region-2. The following information has been provided:
* The current environment has two workload domains named WLD1 and WLD2.
* The workload domains share one NSX Local Manager deployment.
* A VCF Automation Region named region-1 exists that uses the shared NSX Local Manager deployment.
When creating the second Region in VCF Automation, the administrator sees "No results" when attempting to select a NSX Local Manager for the Region. What should the Administrator do to resolve this issue?

• A. Ensure that that the NSX Manager is deployed in HA mode.
• B. Deploy an additional vSphere cluster in WLD1.
• C. Deploy a third workload domain that includes a new, dedicated NSX Local Manager deployment.
• D. Add an additional NSX Edge Cluster In WLD1.

Answer: C

Explanation:
In VMware Cloud Foundation (VCF) Automation, eachAutomation Regionmust be associated with a dedicated NSX Local Manager. A single NSX Local Manager instancecannot be reused across multiple Automation Regions.
In the provided scenario:
* The existing environment hasWLD1andWLD2, both sharingone NSX Local Manager.
* Region-1 in VCF Automation already consumes this shared NSX Local Manager.
* When creatingRegion-2, the interface shows"No results"when selecting an NSX Local Manager.
This behavior matches documented VCF Automation constraints:an NSX Local Manager can only be mapped to a single Automation Region. Once it is consumed by one region, it isnot availablefor any additional region.
To create a second region (Region-2), anew NSX Local Manager instancemust exist in the environment.
The only supported method to obtain a new NSX Local Manager is todeploy a new workload domain, because NSX Local Manager is deployed as part of every VI Workload Domain.
Thus, the administrator mustdeploy a new (third) workload domain, which includes its own NSX Local Manager package, allowing Region-2 to be created successfully.

NEW QUESTION # 36
An administrator is responsible for managing a remote VMware Cloud Foundation (VCF) fleet with the following configuration:
* A single VCF instance with a single Workload Domain.
* The Workload Domain has a single VMware vSAN Express Storage Architecture (ESA) cluster.
* VCF is licensed using the disconnected mode.
The administrator discovers a notification in VCF Operations showing that the VCF licenses have expired.
Which three steps should the administrator take to resolve the issue? (Choose three.)

• A. Use the VCF Business Services console to export a new VCF license file.
• B. Import the license file into VCF Operations and assign to the workload domain vCenter.
• C. Export the usage file from VCF Operations and upload to the VCF Business Services console.
• D. Import the license file into VCF Operations and assign to the SDDC Manager.
• E. Restart SDDC Lifecycle Manager Service in the VCF Operations console.
• F. Increase the license core count in SDDC Manager.

Answer: A,C,D

Explanation:
In VMware Cloud Foundation (VCF) 9.0 usingdisconnected mode licensing, VCF Operations does not automatically synchronize license status with VMware's cloud services. Instead, the administrator must periodically refresh the license file using amanual offline workflow. When the VCF Operations console reports that licenses have expired, it means the license entitlement in theVCF Business Services portalis out of date, and therefore VCF Operations cannot validate the current usage.
The VMware-documented offline licensing workflow requires the following steps:
* Export the usage filefrom VCF Operations.This usage file contains consumption details needed to generate a new offline license.#C is correct.
* Upload the usage file to the VCF Business Services consoleand generate a new offline license file.In disconnected mode, the Business Services portal is the only mechanism to create updated license entitlements.#D is correct.
* Import the updated VCF license file into VCF Operations, specifically assigning it to theSDDC Manager.SDDC Manager is the system that validates and enforces licensing across workload domains, so the new license must be applied there-not only to a vCenter.#F is correct.
Options A and B do not affect license validation.
Option E is incorrect because workload-domain vCenter licensing is independent and not the root cause of VCF license expiration.

NEW QUESTION # 37
An administrator is adding a vSphere Supervisor using VMware NSX classic to an existing VMware Cloud Foundation (VCF) cluster using Distributed Connectivity. When attempting to enable the vSphere Supervisor for the domain the cluster shows up as incompatible with the reason:
No valid edge cluster for VDS 50 Ob 4d 9a cb 32 62 4d - 76 78 6b 92 cd 87 c4 5a Why is the cluster showing up as incompatible?

• A. The WCPReady tag has not been been assigned to the NSX Edge Cluster.
• B. vSphere Supervisor requires Central Connectivity.
• C. The NSX Edge transport nodes have been deployed as large.
• D. AVI load balancing has not been enabled for the NSX Edge Cluster.

Answer: A

Explanation:
A Comprehensive and Detailed Explanation: When enabling vSphere Supervisor with NSX Classic (using the traditional NSX-T Data Center networking stack rather than the newer NSX VPC mode), the vSphere Workload Management wizard filters the list of available NSX Edge Clusters to ensure they are explicitly designated for use with Kubernetes workloads.
The "WCPReady" Tag Requirement: The primary mechanism vCenter uses to identify a valid, compatible Edge Cluster for Workload Management is a specific tag on the NSX Edge Cluster object. This tag must be WCPReady (case-sensitive).
Symptoms: If this tag is missing-which often happens if the Edge Cluster was created manually in NSX Manager rather than through the SDDC Manager automation-the validation process will fail to find any usable clusters. This results in the specific error message: "No valid edge cluster for VDS [UUID]", or simply an empty list of compatible clusters in the wizard.
Resolution: The administrator must log in to the NSX Manager, navigate to System > Fabric > Nodes > Edge Clusters, select the target cluster, and manually add the tag WCPReady (often with the scope "Created for", though the tag itself is the critical filter).
Why other options are incorrect:
B: Large Edge nodes are actually a requirement for vSphere Supervisor (Small/Medium are typically unsupported for this role), so deploying them as Large would make the cluster compatible, not incompatible.
C: vSphere Supervisor fully supports Distributed Connectivity (connecting directly to the VDS), so Central Connectivity is not a hard requirement causing this specific error.
D: While AVI (NSX Advanced Load Balancer) is a supported load balancer, the "No valid edge cluster" error occurs during the Edge Cluster discovery phase, preceding the load balancer configuration.

NEW QUESTION # 38
An administrator is responsible for a VMware Cloud Foundation (VCF) fleet. The administrator has been tasked with commissioning four ESX hosts for a new workload domain that uses vSAN Express Storage Architecture (ESA) as the primary storage solution.
During the host validation stage in vSphere client, the process fails with the following errors:
esx-l.wld.vcf.local. Failed to validate vSAN HCL status.
esx-2.wld.vcf. local. Failed to validate vSAN HCL status.
esx-3.wld.vcf.local. Failed to validate vSAN HCL status.
esx~4.wid.vcf. local. Failed to validate vSAN HCL status.
What Is the cause of the errors?

• A. The RAID controller in each ESX host needs to be reconfigured to use Tri-mode.
• B. The ESX hosts are not using vSAN ESA certified storage devices.
• C. The RAID controller in each ESX host is not configured to use RAID-O/Passthrough.
• D. The ESX hosts must have internet access to validate vSAN ESA compatibility.

Answer: B

Explanation:
VMware Cloud Foundation 9.0 requires strict vSAN ESA hardware compatibility when creating a workload domain that uses vSAN Express Storage Architecture (ESA). During host validation, SDDC Manager and vSphere Client check whether each ESXi host meets ESA requirements, including CPU generation, storage controller type, and-most importantly-ESA-certified NVMe storage devices. The validation errors provided:
"Failed to validate vSAN HCL status" for every host
indicate that the hosts do not meet the vSAN ESA HCL requirements.
VCF 9.0 documentation states that ESA uses a next-generation log-structured filesystem requiring certified NVMe devices only, with no RAID controller dependencies. Unlike OSA, ESA eliminates disk groups, but it requires certified devices listed on the vSAN ESA HCL to pass host validation. If non-certified or unsupported NVMe/SAS devices are present, validation fails exactly as described.
Option A is incorrect because RAID pass-through settings apply to OSA, not ESA.
Option C is incorrect because ESA compatibility validation is performed offline using the SDDC Manager BOM, not via internet lookup.
Option D is incorrect because ESA does not use tri-mode RAID controllers.
Therefore, the documented and verified cause is B: hosts are not using vSAN ESA certified storage devices.

NEW QUESTION # 39
An administrator has been tasked with deploying a new workload domain consisting of six VMware ESX hosts with VMware vSAN into an existing VMware Cloud Foundation (VCF) instance. After starting the deployment from VCF Operations, they discover that only four of the six hosts required are listed for selection in the UI. The administrator checks the Unassigned Host Inventory view in the vSphere Client and confirms that all six hosts are listed.
Which step should the administrator perform to identify why the two hosts are not available for selection?

• A. Check that the network pool the hosts have been associated with is enabled for vSAN.
• B. Check that the management port group on the standard switch has been enabled for vSAN traffic.
• C. Check that the failures to tolerate (FTT) setting for the workload domain is set to 0.
• D. Check that all disk partitions have been deleted from the SSD drives of the hosts.

Answer: A

Explanation:
When deploying a new workload domain in VMware Cloud Foundation (VCF), only ESXi hosts that fully meetall pre-requisitesare displayed in the VCF Operations UI for selection. Although all six hosts appear in theUnassigned Host Inventoryin vCenter, VCF performs additional validation before making them selectable for workload domain deployment.
One of the mandatory requirements for any vSAN-enabled workload domain is that the ESXi hosts must be associated with aNetwork Pool configured for vSAN traffic. A network pool defines the host network configuration (VLANs, MTU, NIC mapping) used during domain deployment.
If the two missing hosts are associated with a network pool thatdoes not have vSAN traffic enabled, or are associated withno network pool at all, VCF willexcludethem from the workload domain deployment wizard.
This is documented behavior: VCF filters out hosts when required network intents-such as vSAN-are not present.
Other options are incorrect:
* A. Management port group enabled for vSAN traffic- vSAN shouldneverrun on the management PG.
* B. FTT setting- Has no effect on host visibility; applies only after deployment.
* C. Disk partitions- Affects vSAN disk claim but doesnotprevent host selection in VCF.

NEW QUESTION # 40
An administrator has observed that the vSphere Global Inventory is only available from the management domain vCenter. The Global Inventory is not available from the workload domain's vCenter.
Why is the "Global Inventory" missing from the workload domain's vCenter?

• A. VCF SSO and vCenter Linking have not been configured.
• B. Supervisor Management has not been enabled.
• C. An inventory sync was not run following the workload domain creation.
• D. An external VIDB instance has not been configured.

Answer: A

Explanation:
TheGlobal Inventory List (GIL)is only available whenmulti-vCenter SSO domain linkingis configured. In VMware Cloud Foundation, themanagement domain vCenteris deployed first and becomes theroot vCenter for global inventory data. For workload domains, their vCenter Servers must beregistered into the same SSO domainandlinkedwith the management-domain vCenter in order for the global inventory data (VMs, hosts, clusters, content libraries) to appear.
If a workload domain vCenter is not SSO-linked, it operates in its own identity domain, and thereforecannot access or present Global Inventory, resulting in exactly the symptom described: the management domain vCenter shows the GIL, while the workload domain vCenter does not.
Option B (Supervisor Management) relates to vSphere with Tanzu and has no impact on Global Inventory.
Option C (inventory sync) is incorrect-there is no manual sync required; GIL relies entirely on SSO linking.
Option D (VIDB) is not related to vCenter linking or inventory visibility; it is used by VCF Identity Broker.
Therefore, the reason the Global Inventory is missing from the workload domain vCenter is thatSSO/vCenter Linking has not been configured, which is required for federation across all VCF vCenters.

NEW QUESTION # 41
An administrator is responsible for managing a VMware Cloud Foundation (VCF) fleet. The following information has been provided about the VCF fleet configuration:
* The VCF fleet consists of a single VCF instance with a single management domain and a single workload domain.
* VCF Automation has a single Organization for VM Apps configured with a VCF Cloud Account for the workload domain.
The administrator has been tasked with creating a new Organization for All Apps to support the developers need to deploy Kubernetes-based applications in a new region in a workload domain.
The administrator attempts to create a new region through the VCF Automation Provider Portal but the VMware NSX manager for the workload domain does not appear on the list of available NSX managers.
What action must the administrator complete to resolve the issue?

• A. Deploy a new VCF workload domain.
• B. Deploy an additional VCF workload domain cluster.
• C. Trigger an inventory synch in VCF Operations fleet management.
• D. Add the SDDC Manager integration for the VCF instance.

Answer: D

NEW QUESTION # 42
......

2V0-15.25 Study Guide Realistic Verified Dumps: https://dumpsvce.exam4free.com/2V0-15.25-valid-dumps.html